Multi |
您所在的位置：网站首页 › embedded controller sio › Multi |
|
Customers often want to quickly evaluate ASi-5 together with several sensors in their lab. The ASi-5 board already exists but is lacking sensors, so a dedicated I/F is required to connect to the appropriate sensors. They often also need to decouple processes and offload their host MCU, so a pre-evaluation of the sensor data by a dedicated MCU on the sensor board is often required. A power supply, usually 3.3V or 5V, is also required. This design shows a single PCB with multiple sensors, interfaces, a dedicated MCU for sensor data pre-evaluation, and a power supply. System Benefits: Multiple sensors on one board for quick evaluation Sensor selection by DIP switch or by software Additional analog inputs Integrated powerful, rich analog features in the RA2A1 MCU for sensor data pre-evaluation/calculation I/F to existing ASi-5 board 8-/16-/24-bit parallel out for simple ASi-5 slave SPI for complex ASi-5 slave Additional PMOD I/F to also allow connection to most Renesas MCU boards Single 3.3V or 5V input and internal generation of additional power rail (3.3V + 5V) |
| CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |